120 high temperature adhesive tape

Anti corrosion self adhesive tapes (Cold Applied System) with it s related primer.
Inner Wrap, Outer Wrap, Joint Wrap, Primer, Double Sided Adhesive tape,
these products are using in order to corrosion protection for Oil, Gas, Petrochemical, Water and Waste Water underground Steel pipelines.

Product Description
Cold Applied Tape for pipeline coating is suitable to any diameters for petroleum, natural gas, water supply, city gas, oil and electric power industries etc. the systems are inner wrap tape and outer wrap tape, primer and Putty.
The tape as consists of two parts:
1. Adhesive: Inner layer of Butyl rubber.

2. Backing: Outer layer of Polyethylene(PE) Plastic.

Specification of tape:

Inner wrap tape:

T-140 (0.38mm), T-150 (0.51mm), T-165 (0.64mm), T-180 (0.76mm), T-1100 (1.02mm), T-1130 (1.27mm);

Outer wrap tape:

T-240 (0.38mm), T-250 (0.51mm), T-265 (0.64mm), T-280 (0.76mm), T-2100 (1.02mm), T-2130 (1.27mm);

Joint wrap tape:

T-365 (0.64mm), T-380 (0.76mm), T-3100 (1.02mm), T-3130 (1.27mm);

Thickness:0.38mm-1.3mm, Width:50mm, 75mm, 100mm, 150mm, 230mm, 300mm

Length: 30-300m

Synthetic Primer:

P19: Solid content 19%;

P27: Solid content 27%.

Mastic filler::

N99: Solid content 99

Application

1 Rust Removal

Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.

2 Priming

Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m².

3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping

The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.

OUR ADVANTAGES

1 More than 10 years of pipeline coating experience

2 Certified by ISO9001:2000 system and ISO14001:2004,make sure all tapes are premium and eco-friend;

3 Global presence in oil , gas and water industrial

4 Our business relationship will be high confidential to any third party;

5 Well-trained & experienced Sales team offer best and careful service before and after sales

Contact us if you need more details on High Temperature Pipeline Tape. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about High Temperature Anticorrosion Tape、High Temperature Pipe Wrapping Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Anticorrosion Pipe Wrap Tape > Anticorrosion Inner Tape